Kits are available for 8, 12 or 16 black light fluorescent lamp option. The Kits are a different design than the UV light sources shown on the web site, and do not have an off-on switch or GFIC, but they have functionally the same UV output. The units are designed to start and stop with a GRAlab timer. Each fluorescent lamp and ballast are tested to save you trips back to the suppliers to return of bad parts (they don't test them before they sell them). The kit includes all the parts to assemble your light source except for the white paint (optional) , yellow carpenter's glue, black PVC electrical tape, and Band-Aids for your cuts and scrapes. Brass plated piano hinge for the door to finish out your light source is included. The 4" fan opening and the air cooling slots will be cut for you. So, all you all you have to do is drill ¼" wire feed-through holes for the ballast wires, then assemble your light source. The 3/4" plywood is cabinet grade material that is cut to size and is the same material used for the assembled light sources shown on this web site. Complete step-by-step instructions included.
8-20 watt black light fluorescent lamp kit 11X20. . . . . . . . . . . . . . . . . . .$470.00 plus Shipping Charges, (60 pounds)
12-20 watt black light fluorescent lamp kit 18X20. . . . . . . . . . . . . . . . . .$625.00 plus Shipping Charge, (65 pounds)
8-40 watt HIGH
OUTPUT black light fluorescent lamp kit 11X20. . . . . . . . $770.00
plus
Shipping Charge, (85 pounds)
12-40 watt HIGH OUTPUT black light fluorescent lamp kit 18X20. . . . . . .$1,195.00 plus Shipping Charge, (105 pounds)
16-30 watt black light fluorescent lamp kit 20X24. . . . . . . . . . . . . . . . . .$1,580.00 plus Shipping Charge, (120 pounds)
See
Operating Instructions Under http://www.eepjon.com/faquv.htm
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|